Heating & Air Conditioner Repair
For the best cooling and heating auto repair service in Perris, trust L & S Auto Works.
Engine Auto Service
When that check engine light comes on, it’s hard not to feel annoyed or even worried.
Maintenance & Auto Service
It’s a fact: regular, quality maintenance extends the life of your vehicle. It also gives you the peace of mind you need.
Exhaust Service
If you’re concerned about passing emissions or you already know your exhaust system isn’t what it should be, visit L & S Auto Works in Perris.
The Absolute Best Car Service in Perris, CA
L & S Auto Works
What sets L & S Auto Works apart from all of the others in Perris, CA?
Quality Service
We use the latest diagnostic equipment and high-quality parts to ensure your vehicle is repaired to the highest standards.
We Offer: O’Reilly All Nationwide Warranty – 24 month/24,000 mile
Experienced and Certified Technicians
Our technicians are highly skilled and certified professionals with years of experience in the auto repair industry. They have the expertise to diagnose and repair any problem your vehicle may have.
Customer Satisfaction
Our goal is to exceed your expectations and ensure your complete satisfaction with every visit.
Our Customer Reviews
Recently Serviced Vehicles
-
2004 Ford Mustang
Mileage154,842Service Date11/12/2024Services Performed- technician confirmed customer concern. scanned vehicle and found p0304 misfire cylinder #4. removed ignition coil and spark plug to inspect condition. spark plug was gaped at .053 which was with in specification. tested ignition coil and was producing spark. inspected and tested #4 fuel injector with noid light .fuel injector was receiving signal from ecu. fuel injector is working properly as design. performed compression test and found 10 psi. performed leak down test. result was 20% leakage from piston rings. this finding does not show reason of low compression. removed passenger side valve cover to inspect valve train. once removed technician found rocker arm for exhaust had fallen out of place. rocker arm had some damage to it. technician recommends to replace rocker arm, lifter and valve cover gasket. advised customer about findings. customer approved repairs. After repairs lifter on cylinder #4 had fallen out of place after repairs. removed cylinder head to inspect valvetrain. After inspection found valve was slightly bent. Advised customer of findings. Recommended customer to remove both cylinder heads and perform valve jib and replace bent valve. Customer approved repairs.
- CYLINDER HEAD GASKET – Remove & Replace – GT,Automatic Trans Both – [Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applicable) and clean and adjust Spark Plugs.]
- Valve Job
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Raul P. gave our service a 5 star review on 11/12/2024 -
2010 Volkswagen CC
Mileage156,543Service Date11/1/2024Services Performed- Opon recieving vehicle on tow truck. customer stated he had taken vehicle to another mechanic to fix his oil leaks. Customer stated the mechanic could not finish customers car and customer took the car from him without finishing the repairs. Customer had explained the mechanic was trying to repair upper and lower timing cover oil leaks. Technician visually inspected engine area and found serpentine belt missing. and signs of oil leaks in timing cover area. Technician pushed car into service bay and inspected under car area. Found front passenger lower ball joint hardware loose and sway bar end link loose a swell. Technician tried starting vehicle, vehicle did not start due to low charge on battery. Jumped battery to get vehicle started and engine turned over but did not start. Installed scanner but not no codes due to low battery. Inspected fuel and ignition to engine. found proper fuel pressure and found spark was present. Performed compression check. Reading are as follows cylinder #1-105 psi #2-0 psi #3-0 psi #4-40 psi. Compression reading are too low or no compression at all. indicating engine damage. Technician performed leak down test on all 4 cylinders and all exhaust valves leaking. Technician recommends tear down to remove timing covers and valve cover to inspect timing chain for timing and valve train for damages. Advised customer of findings and recommendation. customer approved tear down to inspect timing and valvetrain damages. During tear down technician found crank shaft pulley not installed correctly. Due to crank shaft pulley improperly installed, timing for engine was not correct. Causing damage to exhaust valves. Technician also found missing timing guides, debris in oil pan. Technician also found parts of missing timing guides. Technician found crankshaft sprocket and crank shaft pulley damaged.
- CYLINDER HEAD GASKET – Remove & Replace – In-Line4 – [Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applicable) and clean and adjust Spark Plugs.]
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
- VALVE JOB
- ENGINE OIL COOLER – Remove & Replace – In-Line4
CHIFFON K. gave our service a 5 star review on 11/1/2024 -
2007 Kia Sportage
Mileage149,166Service Date10/22/2024Services Performed- after car was towed in, test drove vehicle to confirm customer concern. During test drive was not able to duplicate customers concern, No ESC light on. Scanned vehicle with scanner and only code found was p0125-closed loop temperature not reached. No other warning lights are present at this time. During vehicle inspection found engine oil contamination and advised customer. recommended customer to perform a engine oil contamination diagnostic. It was explained to the customer it is a possibility it might have a damaged head gasket. Customer declined diagnostic. Customer requested to continue with other recommended repairs
- THERMOSTAT &/OR OUTLET – Remove & Replace – In-Line4
- POWER STEERING PUMP DRIVE BELT – Remove & Replace – w/Air Cond
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Patricia T. gave our service a 5 star review on 10/24/2024 -
2011 Buick Regal
Mileage89,727Service Date10/14/2024Services Performed- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
- AIR CLEANER ELEMENT – Remove & Replace
Larry J. gave our service a 5 star review on 10/15/2024 -
2009 Honda Accord
Mileage200,445Service Date9/9/2024Services Performed- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
- STRUT ASSEMBLY – Removal & Installation – Both – [DOES NOT include disassemble or alignment.]
ANGIE C. gave our service a 5 star review on 9/9/2024 -
2014 Audi A6
Mileage103,600Service Date8/20/2024Services Performed- Technician found voltage going to starter but starter is not operating properly, recommend replacing starter and restesting.
- STARTER ASSEMBLY – Remove & Replace
Angelica M. gave our service a 5 star review on 8/20/2024 -
2015 Toyota Prius
Mileage120,581Service Date8/9/2024Services Performed- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Diego D. gave our service a 5 star review on 8/9/2024 -
2005 Ford Pickup
Mileage141,655Service Date7/31/2024Services Performed- Technician found ignition coil connector wire broken recommends to replace and retest.
- remove and connect new #7 coil connector.
- SERVICE AC SYSTEM R134A
Ariel C. gave our service a 5 star review on 8/3/2024 -
2005 Chevrolet Silverado
Mileage358,603Service Date8/1/2024Services Performed- inspected mass air flow sensor, found it dirty and cleaned. installed fuel pressure gauge, found reading at -9 psi. recommended to replace oe fuel filter. Installed fuel filter readings were at -2 which is within specification. test drove and no codes at this time.
- FUEL FILTER – Remove & Replace – 2500 HD,Diesel Element
Daniel D. gave our service a 5 star review on 8/1/2024 -
2004 Chevrolet Tahoe
Mileage235,256Service Date7/31/2024Services Performed- remove and replace exhaust gasket. (Warranty)
CHRISTOPHER A. gave our service a 5 star review on 8/1/2024 -
2006 Chevrolet Silverado
Mileage217,500Service Date7/26/2024Services Performed- CLEANED AREA OIL LEAK OF CONCERN AND ADDED 1 OZ OF DYE TO DETECT WHERE LEAK IS COMING FROM
- IDLER ARM – Remove & Replace – 4WD w/o Skid Plate – [DOES NOT include alignment.]
- PITMAN ARM – Remove & Replace – 1500,4WD – [Includes: R&I Steering Gear Assembly.] – [DOES NOT include alignment.]
- VEHICLE ALIGNMENT
- TRANSFER CASE ASSEMBLY – Remove & Replace – 1500
- TORSION BAR SUPPORT MEMBER CUSHION – Remove & Replace – 1500,4WD Both
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- TIE ROD &/OR END – Remove & Replace – 1500,4WD,Recirculating Ball Type Gears Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing
GILBERT L. gave our service a 5 star review on 7/26/2024 -
2007 Mazda 3
Mileage213,256Service Date7/10/2024Services Performed- A/C COMPRESSOR – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
- SERVICE AC SYSTEM R134A
Eleri A. gave our service a 5 star review on 7/10/2024
Contact Us Today for an Auto Repair Estimate
Our friendly and knowledgeable staff is always happy to answer any questions you may have and will keep you informed throughout the entire repair process. So why pick us for all your Perris auto repair needs? The answer is simple: expertise, customer service, affordability, convenience, and quality. Contact us today to schedule your appointment and experience the difference for yourself.
Hours
Mon-Fri: 8am-5pmSaturday: 9am-3pm
Sunday: Closed
Address
L & S Auto Works
20 Wilkerson Ave Ste B4
Perris, CA 92570
We are associated with the Perris Chamber of Commerce
L and S Auto Works is a proud member of:
