4.9(83 REVIEWS)
  • Mon: 8:00 am-5:00 pm
  • Tue: 8:00 am-5:00 pm
  • Wed: 8:00 am-5:00 pm
  • Thu: 8:00 am-5:00 pm
  • Fri: 8:00 am-5:00 pm
  • Sat: 9:00 am-3:00 pm
  • Sun: Closed
20 Wilkerson Ave Ste B4 Perris, CA 92570
Schedule Appointment
(951) 657-5566

Kia

Home » Kia

  • 2020 Kia Optima

    Kia Optima
    Mileage
    114,558
    Service Date
    3/28/2025
    Services Performed
    • Technician confirmed customer concern. Technician scanned vehicle and found P0304- Cylinder #4 misfire. Tech removed cylinder #4 spark plug, inspected spark plug and found oil build up on electrode of spark plug. The oil build up is not letting the spark plug create a spark causing cylinder #4 to misfire. Tech also removed the rest of the spark plugs. All spark plugs are starting to have oil build up on spark plugs. Tech also performed a compression test on cylinder #4. compression test result: cylinder #4-160 psi. Technician highly recommends replacing engine assembly. Second optionTechnician recommends oil change with engine oil flush due to very dirty oil and to help reduce engine oil consumption. Also recommends GDI fuel induction service to clean combustion chamber of oil build up. All 4 spark plugs are recommended to be replaced.
    • ENGINE ASSEMBLY – Removal & Installation – Gas,Normally Aspirated – [Includes: R&I only those components necessary for the removal of the complete Engine Assembly. DOES NOT include transfer components or tune Engine.]
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
     
    Veronica F. gave our service a 5 star review on 3/28/2025

  • 2007 Kia Sportage

    Kia Sportage
    Mileage
    149,166
    Service Date
    10/22/2024
    Services Performed
    • after car was towed in, test drove vehicle to confirm customer concern. During test drive was not able to duplicate customers concern, No ESC light on. Scanned vehicle with scanner and only code found was p0125-closed loop temperature not reached. No other warning lights are present at this time. During vehicle inspection found engine oil contamination and advised customer. recommended customer to perform a engine oil contamination diagnostic. It was explained to the customer it is a possibility it might have a damaged head gasket. Customer declined diagnostic. Customer requested to continue with other recommended repairs
    • THERMOSTAT &/OR OUTLET – Remove & Replace – In-Line4
    • POWER STEERING PUMP DRIVE BELT – Remove & Replace – w/Air Cond
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
     
    Patricia T. gave our service a 5 star review on 10/24/2024