2010 Volkswagen CC
Mileage
156,543
Service Date
11/1/2024
Services Performed
- Opon recieving vehicle on tow truck. customer stated he had taken vehicle to another mechanic to fix his oil leaks. Customer stated the mechanic could not finish customers car and customer took the car from him without finishing the repairs. Customer had explained the mechanic was trying to repair upper and lower timing cover oil leaks. Technician visually inspected engine area and found serpentine belt missing. and signs of oil leaks in timing cover area. Technician pushed car into service bay and inspected under car area. Found front passenger lower ball joint hardware loose and sway bar end link loose a swell. Technician tried starting vehicle, vehicle did not start due to low charge on battery. Jumped battery to get vehicle started and engine turned over but did not start. Installed scanner but not no codes due to low battery. Inspected fuel and ignition to engine. found proper fuel pressure and found spark was present. Performed compression check. Reading are as follows cylinder #1-105 psi #2-0 psi #3-0 psi #4-40 psi. Compression reading are too low or no compression at all. indicating engine damage. Technician performed leak down test on all 4 cylinders and all exhaust valves leaking. Technician recommends tear down to remove timing covers and valve cover to inspect timing chain for timing and valve train for damages. Advised customer of findings and recommendation. customer approved tear down to inspect timing and valvetrain damages. During tear down technician found crank shaft pulley not installed correctly. Due to crank shaft pulley improperly installed, timing for engine was not correct. Causing damage to exhaust valves. Technician also found missing timing guides, debris in oil pan. Technician also found parts of missing timing guides. Technician found crankshaft sprocket and crank shaft pulley damaged.
- CYLINDER HEAD GASKET – Remove & Replace – In-Line4 – [Includes: Remove carbon and check surfaces for warpage. Includes adjust Valves (where applicable) and clean and adjust Spark Plugs.]
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
- VALVE JOB
- ENGINE OIL COOLER – Remove & Replace – In-Line4
CHIFFON K. gave our service a 5 star review on 11/1/2024
